solid die
英 [ˈsɒlɪd daɪ]
美 [ˈsɑːlɪd daɪ]
整体板牙（模）
双语例句
- Solid Modeling Technology and its Application in the Design of the Extrusion Die for Al Profiles
铝型材挤压模设计中的实体造型技术及其实现 - Applicable to the production of wear-resistant parts, solid forging die processing.
适用于制作各种耐磨零件、整体模具和强力加工工具。 - Application of Semi-solid Die Casting of Aluminum Alloy
铝合金半固态压铸技术的应用 - When the cushion was thin, dimples still occured. When the thickness approaches to 8 mm, the dimples are eliminated completely, and the surface of the part is smooth and the forming result approximates the result by conventional solid die.
当弹性垫较薄时，成形件表面仍有压痕出现，当弹性垫厚度达到8mm时，压痕被消除，成形表面光滑，与整体模具的成形结果非常接近。 - Design and Experiment of Octagon Solid Die Die cave 3-D solid modeling
八角整体锭模的设计与初步试验 - A few types of dies is analyzed. A new design of Solid porthole die, which simplify die manufacture and maintenance, is introduced.
分析了几种常用模具结构的优缺点。介绍了整体分流模的一种新设计方法，使模具加工和维修大简便。 - With the optimization of semi solid die casting process, three kinds of high quality motor parts were manufactured successfully.
通过工艺优化，采用半固态压铸技术成功地制成3种高质量的汽车零件。 - The CAD system can inputs a part, then carries out the operation design to it automatically, and creates the solid of whole working part and assembles the solid of the drawing die lastly.
系统可输入的筒形件后自动完成优化拉深工序设计，最后生成全部工作零件的实体图以及各工序拉深模具的实体装配图。 - Research and application of the new process for producing forging ingot with solid die and heat insulating shield
整体钢锭模挂绝热板生产锻造钢锭的应用研究 - Die cave 3-D solid modeling Design and Experiment of Octagon Solid Die
机头流道的三维实体造型研究八角整体锭模的设计与初步试验 - This paper discussed the design-parameter of octagon solid die and its result of experiment.
主要介绍太钢2.8t八角整体锭模的设计参数以及初步试验结果。 - The basic method in building solid models through Pro/ E is proposed. The method is used in building the solid model of a complicate porthole compound die.
介绍了基于Pro／E建立实体模型的造型方法，并应用该方法建立一复杂的平面分流组合模的实体模型。 - Semi solid die forging at different temperatures was conducted, the results showed that the material could be shaped under low pressure, SiC particles still uniformly distributed after processing and combined well with matrix alloy;
不同温度的半固态模锻表明，材料能在较低压力下一步成形；SiC颗粒在加工后仍分布均匀，与基体结合良好； - The Forming Process and Solid Bulging Die Design for the Case of Motorcycle Fuel Tank
摩托车油箱外壳成形工艺及整体一次胀形模设计 - Two methods for building solid models with ANSYS software were introduced. The methods were successfully applied to the building of the solid model of the hot extrusion combined die with portholes for aluminum profiles, which provided a basis for further finite_element analysis and optimized design.
介绍了ANSYS中建立实体模型的两种方法，并将其成功地运用于铝型材热挤压平面分流组合模实体模型的建立，为进一步进行有限元分析和优化设计提供了基础。 - Solid Modeling Technology and its Application to Extrusion Die Design Based on ANSYS
基于ANSYS的实体造型技术及其在模具设计中的实现 - Temperature Field and Thermal-stress FEM Analysis of Solid Board of Large-sized Magnesium Alloy Die Casting Machine
超大型镁合金压铸机定型板温度场及热应力的有限元分析 - This article introduced installation of Solid Edge software, establish of entity model and application of Solid Edge in mechanical bulging die design.
对Solidedge软件的安装、实体建模的基础过程以及在设计塑料管材胀口模具工作中的运用进行了简要介绍。 - The paper introduced the situation of producing solid bearing cages and studied the isothermal temperature extrusion technology and die design.
介绍了实体轴承保持器的生产现状，研究了保持器的等温挤压成形工艺，并介绍了相关模具设计。 - It shows that the semi solid castings have better mechanical property than that of the liquid die castings.
试验得出，与液态压铸成形件相比，半固态压铸成形件可以获得更佳的综合力学性能； - The solid modeling in CAD die casting die system based on characteristic parametrization was developed.
对压铸模智能CAD系统中特征参数化实体建模技术进行了研究。 - In this paper, FEA on design schemes fore-and-aft weight-reduction of solid plate on some large-scale magnesium alloy die cast machine and compare between rigidity and stress distribution of the two design schemes are conducted.
对某高吨位镁合金压铸机定模板减重前后的设计方案进行有限元分析，对比了两种设计方案的刚度值及应力场。 - A New Design of Solid Porthole Die for Aluminum Profiles
铝型材整体分流模的一种设计方法 - Solid plate is an important part of die cast machine, and its deformation degree during manufacture has great influence on producing process, especially products 'accuracy.
压铸机定模板是压铸机的重要零件，它在生产中变形程度的大小对生产过程尤其是所加工产品的精度具有重要影响。 - Compound materials SiCp/ ZL201 is prepared by half solid state stir technology and liquid die forging, whose mechanical performance and section form are searched for with optics microscope, SEM, mechanical performance test and section analysis.
采用半固态搅拌工艺和液态模锻方法制备了SiCp/ZL201复合材料。用光学金相显微镜、扫描电子显微镜和力学性能试验研究了复合材料的显微组织、力学性能和断口形貌特征。 - Design of the Frame-Typed Solid Blanking Die for the Inner Cavity of the Refrigerator
冰箱内腔框架式立体冲裁模设计 - First, according to the specific solidification property of magnesium alloys and the opacity of the metal mould, the solid feature and the surface mesh of the magnesium die casting was made through the Pro/ E.
首先，针对镁合金压铸工艺特点和充型过程的不透明性，采用Pro/E进行铸件的实体造型，并生成面网格文件。 - Generation and Elimination of Pores in Semi-Solid Die-Cast Aluminum Alloys
铝合金半固态触变压铸件气孔的形成与防治 - The Automatic Method of Solid Modeling for Blanking Die on CAD
冲裁模的CAD自动实体建模方法 - By changing the diameters of solid particles 、 reverse pressures and die clearances etc, it obtains a great deal of test data.
通过改变颗粒介质直径、反向压力和凹模间隙等因素，取得了大量的试验数据。